What material are labor protection gloves usually made of?

There are various types of gloves, such as wind resistant gloves, cold resistant and warm gloves, and labor protection gloves. Labor protection gloves are gloves used by workers to protect their hands from injury. Generally speaking, they are stronger than other gloves. So, what raw material is stronger for labor protection gloves? How to choose and apply labor protection gloves correctly?

Labor protection gloves are made from stronger raw materials

1-layer cowhide gloves

A part of the outer skin from leather products that does not require any mechanical processing, manufacturing, or repair. It has the advantages of practical operation agility, comfort, and speed, and is suitable for the transportation or practical operation of small and medium-sized objects.

2 layers of leather gloves

Derived from the inner layer of leather products, obtained by removing the surface layer, it has the characteristics of wear resistance, suitable for drying and promoting physical labor, and is suitable for installation and transportation of sharp objects, laser cutting work, slippery objects, and welding products.

3 cowhide gloves

The vast majority of safety gloves are made of cowhide (scraped off from the right season) or cowhide (from the back of the cow), which has the advantages of softness, agility, wear resistance, resilience, puncture resistance, and insulation.

4 sheepskin gloves

Belonging to a single skin layer, it is lighter than cowhide, and its advantages are very similar to cowhide. Its thickness is more suitable for making anti reflective gloves, and it has a stronger practical touch effect.

5 Pork Skin Gloves

The majority of pig's first layer cowhide and second layer cowhide are widely used in Southeast Asian countries, but their anti reflective properties are poor and their agility after blending is not very good. Therefore, they are used as gloves for simple protection, but they are of high quality and low price.

6 lambskin gloves

The wear resistance and resilience properties are relatively weak, so when used to make general gloves, the thinner they are, the more agile and comfortable they are to wear.

How to choose and apply labor protection gloves correctly

1. Hand size: Everyone should choose gloves that are suitable for themselves according to their own hand size. Gloves are very small and can be very tight when worn, which is not conducive to the circulation of blood and blood in the hands. Gloves are very large and not easy to work with, and they are also very easy to fall off from the hands.

In the office environment, everyone should choose gloves that are suitable for themselves according to the size of their hands. Gloves are small and can be very tight when worn, which is not conducive to the circulation of blood in the hands. Gloves are large and not easy to work with, and they are also very easy to fall off from the hands.

3. No damage is allowed. Regardless of the type of glove you are using, if damage occurs, it should be immediately replaced or replaced with other sandpaper gloves or leather gloves before use.

4. If the vulcanized rubber gloves are made of styrene butadiene rubber, they should be chosen with one part of the palm being thick and the other part being evenly thick, and should not be completely damaged, otherwise they cannot be reused. And it cannot be allowed to come into long-term contact with chemicals such as acids, nor can it be touched by such sharp objects.

5. Regardless of which type of gloves are used, relative inspection should be carried out on time. If there is any damage, corresponding measures should be taken. And during application, the sleeve mouth should be inserted into the oral cavity to prevent accidents; After application, clean and tidy up the internal and external waste. After drying, sprinkle light calcium powder and level it to prevent damage. Do not place it on the ground.